Arctic Cat

THESE ARCTIC CAT A-ARMS ARE FABRICATED FROM THE FINEST 3AL-2.5V GRADE TITANIUM IN THE INDUSTRY.  EACH PIECE IS HAND MADE AND TIG WELDED.  WE CHALLENGE YOU  TO FIND A BETTER ARM. 

New narrow Pro Climb forward 2.625” A-arm kits adjustable from 35.125” to 36.5”

BENEFITS 2.625" forward spindle placement makes the sled more predictable for carving whether it's in the deep or on the trail. Down hill turns or off camber situations take less effort. Forward design also makes a noticeable difference not only during the ride but at the end of the day. Better all around stability in almost every situation. Uppers are interchangeable,2 degree more turning radius and even more with optional mod ( slight sanding on a-arm spindle stop). Ground clearance design keeps the lower arms up and out of the snow for less drag and possibly avoiding hidden objects under the snow. Uses stock spindles 2012-15. Uses stock shocks with minimal modification, meaning installing spherical bearings. Actual spherical bearings are stainless steel bearings held in the eyelets by a snap ring. Most aftermarket shocks already have spherical bearings. Stock shocks can be sent to Gas shock repair in idaho ( 208-716-0475) for $50/ shock which includes the cost of the bearing and machining of the snap ring grove. Maintains stock ride height. Rod end sheer point design gives you a better than 50-50 chance at replacing a $17.50 part versus an a-arm. Flatter ski at full turn (stock was 12.0 degrees these are 9.7)Lighter than stock by 5 lbs. New titanium stud mounts that attach arms to spindle come as standard equipment as well as titanium misalignment bushings (optional titanium bolt kits available).

Due to the high volume of credit card fraud we require that your billing adress matches that of your credit card billing. House or P.O. Box must match as well as zip code or the transaction will be declined.