2017-25 Gen4/Gen5 36″ True Clearance Arm/Spindle Kit

Ski-Doo 36″ Gen4/Gen5 True Clearance Arm Kit. This kit requires a stock shock Length of a 2022 34″ stance. The rod end design is a huge advantage allowing you in most cases to unscrew them after an impact, replace with your spare and continuing to ride instead of bending the arm….a $30.00 part instead of an a arm. NOT guaranteed, but proven to work at least 75% of the time. This is a “TRUE” ground clearance arm, both tubes are arched unlike others on the market that have the front tube arched and rear tube not. Our upper a arm design with a fairly wide radius will accommodate ANY stock or aftermarket shocks even with piggy back reservoirs. Sway bar tabs included. Alternative Impact Skidoo SPINDLES 6061 T6 Aluminum with Nyla Tron Bushings. Inline mounting geometry. Only available in black anodized

Recommended ideal shock length for this kit is 16″ eye to eye extended length. Maximum shock length is 17.5″.

Kit come with

• 2 Upper arms
• 2 Lower arms
• 2 lower spindle mounting studs
• 2 10mm nylon nuts
• 2 misalignment bushings
• 2 lower 5/8″ rod ends
• 2 upper spindle mounting studs
• 2 misalignment bushings
• 2 10mm Nylon nuts
• 2 1/2″ Rod ends
• 1 Set Spindles