Ultimate Lightweight P22 Clutch Package

Description

This is the Ultimate lightweight clutch kit. Saves 451 grams of rotating mass. Impressive throttle response that is teamed up with our titanium clutch bolts, titanium clutch cover bolts and weigh pins with titanium nuts. Bolts are titanium grade 5 “Ultimate minimum yield strength of 10,000 PSI” more than stock bolt.

This Kit Includes

• 7075 T6 Billet Secondary Spider
• Spring Retainer Cup
• 4 Helix Bolts
• P22 Titanium Primary Clutch Bolt
• P22 Titanium Secondary Clutch Bolt
• Titanium Clutch Cover Bolts
• Titanium Clutch Weight Pins and Titanium Nuts
• Secondary Roller Bearing and Steel Hardened Washer

We recommend a small drop Loctite for the primary bolt and it is a must on the secondary bolt, blue is sufficient. Under no circumstances should pneumatic tools be used. Apply no heat. If the clutch is already torqued to factory settings install the new titanium bolts at our recommended torque specs 80 ft. lbs. on primary, 25ft lbs. on the secondary, it will handle factory torque specs but this is what we have been using since 2005. If the clutch has been removed, reinstall with the factory clutch bolt and set it to factory recommendations. Then remove the factory bolt and replace with the titanium bolt and torque to our recommendation 80ft. lbs. ABSOLUTELY NEVER USE THE BOLT AS A PULLER (WATER TRICK)! Head is a T60 torx